Air Venturi Carbon Fiber Charging Station, 4500 psi, 98 cu ft Air Venturi Carbon Fiber Charging Station, 4500 psi, 98 cu ft


Price: $749.00


Part Number: AV-4598HPT


Buy

Need Pellets? Visit  Ammo

DescriptionSpecifications
One of the largest charging tanks available in the marketplace, the Air Venturi Carbon Fiber Charging Tank weighs much less than a steel scuba tank. Better yet, the advantage of carbon fiber over steel allows for a higher pressure capability of 4,500 psi, meaning more charges for your favorite PCP airgun and more shooting time for you.

Fill your air rifles and pistols with the simple fittings and be on your way to more pest control, target shooting and even competition. With 4,500 psi and a whopping 98 cu. ft. capacity, enjoy the most refills of your 3,000 psi airguns. The tank features stainless steel fittings, a 24Â in. microbore hose and a rubberized hand wheel for controlled filling. The integrated pressure gauge lets you know when you’re reaching your full charge, and the bleed valve is conveniently located on the valve.

Even shooting teams will be delighted at the number of fills they get from the Air Venturi Carbon Fiber PCP Charging Station. Averaging more than 40 fills, this tank is a practical choice for many shooting venues. For example, approximately 42 charges are provided on a 3,000 psi gun with a 215cc cylinder from a beginning gun reservoir pressure of 1,500 psi. You can expect more than 20 full charges on empty 3,000 psi gun with a 215cc cylinder. (The total number of fills vary based on the maximum charging capacity and the reservoir size of the gun(s) being charged.)

Carbon fiber filament wound over aluminum bladder
74 cu. ft. capacity
4,500 psi max pressure
DOT-approved
9.9 lbs. dry weight
6″ wide
23.5″ tall to top of valve
4,500 psi max pressure
24 in. microbore hose with 1/8″ BSPP
Male and female threaded ends, each 1/8″ BSPP
Stainless steel female quick-disconnect coupling attached to output end of hose
74 cu. ft. carbon fiber tank, 4,500 psi
DIN 300 bar PCP charging station
DIN 300 bar valve with burst disc
Inline pressure gauge 0-6000 psi 1/8″ BSPP98 cu. ft. carbon fiber tank, 4,500 psi
DIN 300 bar PCP charging station
DIN 300 bar valve with burst disc
Inline pressure gauge 0-6000 psi 1/8″ BSPP

Tank life starts at manufacture date. Delivered date will likely be 1-6 months into the 15 year life on the tank. Hydro test required every 5 years

Other items you may need

Warne 216M JSB Pellets 15.89 Rifle Level PCP Foster Fitting
Rings Ammo Level Filling PCP